Practice exams cover the same areas as the actual firefighter exam. This varies depending on hiring.Occupational Health and Safety RegulationThere are several useful tools to assist you in preparing for a firefighting test. How and when do I apply The Phoenix Fire Department recruits for Firefighter approximately once per year. Test-Taking Strategies: Guidelines to follow on the day of the test to help you finish the test on time and increase your chances of scoring well on it Sample Test Questions: Sample questions for each of the three sections of the test Sample Test Answer Key: Answers to each of the sample questions, along with brief explanationsWritten Exam.

Construction, Excavation and Demolition Ladders, Scaffolds and Temporary Work Platforms Personal Protective Clothing and Equipment

It may be easier to work using gloves meeting the 2007 edition. The CCHR test helps ensure that the thermal insulation in these areas performs as specified in the Standard while compressed.The new glove dexterity test is better able to distinguish between gloves with good dexterity and with bad dexterity. A conductive and compressive heat resistance (CCHR) test was added for insulation at the shoulders and knees.The shoulder area of a coat can become compressed by the self-contained breathing apparatus (SCBA) straps and the knee areas by kneeling. Clothing with a high THL rating may help reduce heat stress but may reduce thermal protective performance (TPP).

Part 31 of the Regulation does not require proximity firefighting protective clothing to meet a NFPA standard.NFPA 1971 specifies minimum design, performance, testing, and certification requirements for structural and proximity firefighting protective ensembles. Proximity firefighting protective clothing requirements were added to NFPA 1971.The NFPA standards on structural and proximity firefighting protective clothing have been combined into one standard. The optional CBRN requirements do not decrease the protection offered in structural firefighting.

A garment that can withstand 204 degrees C (400 degrees F) for 5 minutes without melting, dripping or igniting will satisfy this requirement.In thermal stability tests performed by the WCB laboratory, the following clothing samples tested did not melt, drip or ignite when exposed to a temperature of 204 degrees C for 5 minutes: Issued August 1, 1999 Editorial Revision August 2004Section 31.15 of the OHS Regulation (' Regulation') states:Firefighters required to approach the seat of a fire or enter a structure or other hazardous area during an emergency incident must not wear shirts, trousers, jackets or coveralls that have poor thermal stability or that ignite easily.The purpose of this section is to specify that station wear or other garments worn under protective coats and pants do not create a hazard to a firefighter due to poor thermal stability or ignition of the garment. The 2007 edition of NFPA 1971 can be found at. It does not provide criteria for wildland firefighting protective clothing and equipment.The NFPA offers free read-only versions of standards to users who register on their site. This is because the scope of the NFPA standards referenced by sections 31.13, 31.14, and 31.16 excludes proximity firefighting.NFPA 1971 does not specify how protective clothing and equipment is used or maintained. Footwear and proximity firefighting protective ensembles are not required by Part 31 to meet a NFPA standard.

35% cotton, 65% polyester shirting and pants fabric.The following fabric failed this requirement:Section 31. 50% cotton, 50% polyester T-shirt fabric

Firefighter Tools Test